Pose 1
Pose 2
Pose 3
Reflection
I must say, this is a really tedious exercise!!! Much efforts and concentrations that you have to put in order to get the result, but after you have done it, you will have a sense of achievement and feels good after hours of staring infront of the computer. The poses are actually to show that all the parts are working well and fine. Overall this exercise is still not bad, through all this tutorials, it teaches use a lot of things such as the ik handles, joints and etc. I actually have some trouble doing the exercise, when I reach the part to orient the hands, one of it was actually screwed up due to the local axes of the tips of the fingers that did not set properly, I was not very sure how to do it actually, but after awhile I found out that using the freeze transformation was able to correct the axes position of the fingers thus saved me and I am able to continue. Overall, the exercise really help me a lot in learning the required tools for rigging, as well as patient, which is very important when doing the walk-cycle part during the final project, where it requires lots of patient to complete the work, a very satisfying and achieving exercise.
No comments:
Post a Comment